| PART |
Description |
Maker |
| HCPL-3150 |
Single Channel 0.5 Amp Output Current IGBT Gate Drive Optocoupler(单通道 0.5 Amp输出电流 IGBT门驱动耦合 单通道0.5安培的输出电流IGBT栅极驱动光电耦合器（单通道0.5安培输出电流IGBT的门驱动耦合器）
Single Channel 0.5 Amp Output Current IGBT Gate Drive Optocoupler(?????0.5 Amp杈???垫? IGBT?ㄩ┍?ㄨ????
|
Fujitsu, Ltd.
|
| HCPL-314J-000E |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| HCPL-3150 HCPL-315J |
0.5 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| HCPL3140 HCPL-3140 HCPL-0314 |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
Agilent(Hewlett-Packard)
|
| HCPL-T250 HCPL-T250300 HCPL-T250360 HCPL-T250500 H |
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-331J-500E |
1.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO, Fault Status Feedback and Active Miller Clamping
|
AVAGO TECHNOLOGIES LIMITED
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| FS100UM-03 |
100 A, 30 V, 0.0054 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220
Bench Power Supply; Output Voltage:30V; Output Current:3A; Number of Outputs:3; Calibrated:Yes; Certificate of Calibration:Yes; Output Current 2:.5A; Output Current 3:.5A; Output Voltage 2:12V; Output Voltage 3:5V
HIGH-SPEED SWITCHING USE
|
Mitsubishi Electric Corporation
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| FOD8316 FOD8316R2 FOD8316R2V FOD8316V |
2.5A Output Current, IGBT Drive Optocoupler
|
Fairchild Semiconductor
|
| HCPL0730 HCPL0731 HCPL0700 HCPL0700R2 HCPL0700R2V |
Low Input Current High Gain Split Darlington Optocouplers
8-Pin SOIC Dual-Channel Low Current High Gain Split Darlington Output Optocoupler; Package: SOIC-W; No of Pins: 8; Container: Tape & Reel 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER
|
Fairchild Semiconductor, Corp.
|
